Modbus interface MPNE1001

The MPNE1001 module has a Modbus RTU interface. The MPNE1001 manages data from modules and it intarfaces them on a Modbus RTU bus.

The MPNE1001 is part of a modular system composed of a base board and a maximum of two expansion modules, in order to get different configuration of inputs and outputs (digital and analog).

The base board has 16 digital lines and, if needed, it is possible to add two more expansion modules.

Expansion modules available:

• 8 digital inputs (code 01);
• 8 digital outputs (code 02);
• 2 analog inputs and 1 analog output (code 05).

All modules can be hooked on a DIN rail EN 50022 (din35 - 4 DIN modules).

The Modbus RTU module interface MPNE1001 consists of:

• Modbus RTU bus interface;
• 3 status LEDs;
• 16 LEDs for the digital lines.

SOFTWARE

Protocol: Modbus RTU
Baudrate: 9600, 19200, 38400, 57600
Module address: from 1 to 63

HARDWARE

COMMUNICATION PORT:

1 RS485 half duplex

INPUTS / OUTPUTS:

• 8 digital inputs (PNP 0-24Vdc). Two of them can be used to connect mono/bi-directional encoder.
• 8 digital input/output (PNP 0-24Vdc). For the relay output the ACIN01 product is needed.
• There are some I/O in the device that can be managed with a more advanced logic than the simple use as inputs and outputs.
  In particular, they are present:
  • PTO outputs
  • Encoder inputs
  • Fast inputs
  • Fast outputs
    Given these IOs, rapid response logics can be implemented without the explicit intervention of the PLC

Expansion modules available:

• 8 digital inputs;
• 8 digital outputs;
• 2 analog inputs and 1 analog output.
  

Power supply: 24Vdc ± 15%, 3W
Dimensions: 80(l) x 60(h) x 122mm(depth) (4 DIN rail modules)
Dimensions with expansions: 80(l) x 80(h) x 122mm(depth) (4 DIN rail modules)
Working temperature: 0÷55°C
Weight: 0,145Kg

Nodo remoto Modbus MPNE1001 - Manuale d’uso (IT)

Modbus remote node MPNE1001 - User Manual (EN)

Modelli MPNE1001 (IT)

MPNE1001 Models (EN)